July 12, 2022
Door problems are one of the most common and frustrating things to deal with around the house — especially if you have a whole family trying to get in and out daily. In cases like that, you want the door to work easily and open and close smoothly. A faulty door can stress everyone out, changing routine tasks into complicated ones. In some cases, the issue may not be the door but the door lock. These situations may require a professional locksmith such as Diego's Locksmith for door lock repair.
If you have a hollow-core door, it must have an adequate strike plate. A strike plate is a metal plate that allows your door to latch onto a frame or jamb. If your door doesn't have one, you can purchase one at any hardware store. If you have an existing strike plate, ensure it is level with the jamb. If it isn't level, your door may not close properly and could cause injury when you try to close it. If the door is still missing the strike plate, you should contact a professional locksmith in Chula Vista for some assistance.
If your door opens into a room without any weather stripping around it, then cold air will be able to enter through this open area. Your home can feel drafty and uncomfortable during colder months when there are no windows or other sources of heat in this particular room. To fix this problem, simply install weather stripping around areas with gaps along the door's bottom, top, and sides (you can use foam tape or caulk).
A squeaking door can be especially frustrating while trying to sleep at night. One of the most common causes of squeaking doors is warped frames or loose hinges. A simple remedy for this problem is applying oil to the hinges and tightening them down with a wrench. If this does not solve the problem, you may need to replace your hinges altogether.
If your door sticks at the top corner when you open it, it may need some lubrication or adjustment of its hinge pins. To fix this problem, use WD-40 on each hinge pin and work them back and forth until they move more freely in their holes. This should allow your door to open easily with minimal effort from you.
A sticking latch is a fairly common problem; fortunately, it's also one of the easiest to fix. You need a screwdriver and a little time, and you'll be back in business. Check the latch first, and remove the door panel by removing its screws or clips. If there's no visible damage to the latch or strike plate, try lubricating them with light oil or WD-40.
You'll probably need to replace the entire assembly if visible damage occurs. Look for an aftermarket part that matches your vehicle's make and model if possible; otherwise, purchase one designed for your specific make and model from an auto parts store or mechanic.
Diego's Locksmith can help you with some of your door needs, especially door lock repair.